IG.100115

Power Expansion Pack for MōVI XL

$1,757.80 AUD

A premium power upgrade for the most demanding gimbal operators.

Power Expansion Pack for MōVI XL provides multiple inputs and outputs to power any cinema camera and high draw accessories the DP might throw at you.

ALEXA LF shooting ARRI RAW, Preston MDR, and Schulz rain spinner — no problems! 🔥

Expansion Pack can draw power from either TB50 Battery Adapters, TB51 Battery Adapters, or 6S LiPo batteries with the included XT90 splitter cable.

Avoid the underpowered D-Tap system of MōVI XL and reduce the amount of heavy and bulky batteries within the gimbal cage!

Scroll ↓ to find out more.

I/O

INPUT: 2-Pin 1B Lemo
⠀ (for Feed Cable)

INPUT: 8-Pin Lemo 20-28V
⠀ (for block battery or AC Power)

OUTPUT: 3-Pin Lemo 15/25V
⠀ (for camera)

OUTPUT:Two 2-Pin Lemo 15V regulated
⠀ (for accessories up to 100W)

OUTPUT: 3-Pin Fischer 20-28V power only
⠀ (for rain deflector)

HOUSING

CNC machined from high-grade aluminium and hard anodised - this housing is built to withstand life on set.

WEIGHT
8.04oz / 228g

DIMENSIONS
2.91 x 3.22 x 1.18” / 74 x 82 x 30mm

FEED CABLE

The Feed Cable plugs into the battery source up top, runs down the spine, through the roll motor and roll beam, and enters the tilt cage through the bearing assembly.

We've included zip ties to secure the Feed Cable to the 50mm carbon tubes.

CONNECTOR SPECS
2-Pin (male) 1B Lemo Right Angle connector
2-Pin (female) 1B Lemo Straight connector

LENGTH
63-inch / 160cm

WEIGHT
2.99oz / 85g

3-PIN LEMO EXTENSION

The included 6-inch Extension Cable enables you to use any of our 3-Pin Lemo power cables!

Some customers may already own these cables for MōVI Pro and TB50 Hammerhead.

3-Pin Lemo to Camera (4-Pack)

3-Pin Lemo to ALEXA Mini + Mini LF + 35

3-Pin Lemo to ALEXA Classic + 65 + Film Cameras

3-Pin Lemo to KOMODO

3-Pin Lemo to KOMODO-X + V-RAPTOR

3-Pin Lemo to RANGER + V-RAPTOR-XL

3-Pin Lemo to FX6 + FX9

3-Pin Lemo to VENICE 1&2 + BURANO + C500II

3-Pin Lemo to Ember S5K

3-Pin Lemo to Phantom Cameras

3-Pin Lemo to DXL2

XT90 / LEMO SPLITTER CABLE

For those using 6S LiPo batteries this splitter cable provides you a Lemo output for the Feed Cable.

CONNECTOR SPECS
2-Pin (male) XT90 connector
2-Pin (female) XT90 connector
2-Pin (female) 1B Lemo Straight connector

LENGTH
5-inch / 12cm

WEIGHT
2.99oz / 85g

CARBON MOUNTING PLATE

The slimline carbon plate mounts with two M3 bolts.

Power Expansion Pack can be positioned horizontally or vertically, inside or outside the Tilt Cage.

Cable lengths are designed for placement on the non operator side of the cage.

WEIGHT
0.59oz / 17g including all six mounting screws

DIMENSIONS
2.71 x 2.91 x 0.15” / 69 x 74 x 4mm