TB51 Expansion Pack for Inertia Wheels

————————————————

KEY FEATURES

• Power Inertia Wheels as well as your preferred monitor and transmitter from a single battery — less weight, streamlined workflow, ideal for travel
• TB51 battery delivers higher voltage (20-25.5V) than a V-Lock or Gold Mount battery (11-17V). This provides the Inertia Motors more strength which means higher drag or mass settings before slipping
• TB51 batteries are built for high-draw. They're also compact, smart, affordable and air travel safe
• 8-Pin Lemo DC input enables hot-swap for the wheels and all your accessories
• This power solution lives within the footprint of the controller base so it fits inside the OEM foam case

INPUTS / OUTPUTS

• 8-Pin 2B Lemo Input
  Feed in 20-34V from an AC Power Supply or block battery. 8-Pin 2B Lemo is the same as ALEXA Mini/Mini LF.
• 3-Pin 0B Lemo Output
  Unregulated 20-25.5V for powering Inertia Wheels
• 2-Pin 0B Lemo Output  (back)
  Regulated 15V (100W total) for powering your monitor, transmitter or other accessories
• 2-Pin 0B Lemo Output  (front)
  Regulated 15V (100W total) for powering your monitor, transmitter or other accessories
  

————————————————

DJI TB51 KEY FEATURES

● Built for high draw ⚡️

● 4280 mAh / 98.8 Wh ✈️ carry-on air travel safe

● Compact design and lightweight: 16.5oz / 468g

● TB51's can power cameras, camera accessories, gimbals, drones, and remote controllers

● There is one capacity of TB51 battery, therefore a simplified gimbal balancing workflow

● Built-in auto heating system down to -4° F (-20° C) ❄️

● Automatic protection cutoff at 2%

● Automatic self discharging down to 60%

● Can be left unattended while charging

● In Fast Mode, charge a pair of batteries up to 90% in as little as 35 minutes

● TB51’s are one of the more affordable high-voltage camera batteries on the market

● TB51's and Charging Hub are widely available in many parts of the world

————————————————

TB51 BATTERIES WORK WITH

● DJI Inspire 3

● Control Deck for DJI Transmission

● NODO Inertia Wheels Brushless & MAX

● NODO Torq Head

● DJI High-Bright Remote Monitor

● Freefly MōVI Pro

● Freefly MōVI XL

● TB51 Hammerhead ‣ ALEXA + DSMC + VENICE

● TB51 for ALEXA 35 + URSA Cine

————————————————

COMPATIBLE WITH
NODO Inertia Wheels Brushless
NODO Inertia Wheels MAX

MADE FROM
High-grade 6061-T651 aluminium billet
3mm carbon fibre

IN THE BOX
TB51 Battery Plate
Power Expansion Pack
Carbon Mounting Plate
Six M3 x 8mm countersunk screws
Power Cable ‣ 3-Pin Lemo Straight to 8-Pin Lemo Right Angle (7-inch/18cm)
Power Cable ‣ 3-Pin XLR Straight to 8-Pin Lemo Straight (8ft/2.4m)

WEIGHT
13.4oz / 380g module + cable
29.9oz / 850g module + cable + TB51

DIMENSIONS
5.43 x 3.78 x 2.63” / 138 x 96 x 67mm