Your Cart is Empty
🔥 FREE DHL EXPRESS SHIPPING ON ORDERS AUD $1200+ 🔥
IG.100116
$1,317.80 AUD
The ultimate gimbal power solution!
Power Expansion Pack for MōVI Pro provides multiple power inputs and outputs for any camera and high-draw accessories the Director or DP might throw at you.
The concept is simple:
Source 20-25.5V from the 2-Pin Lemo outputs featured on our TB50 Battery Adapters or TB51 Battery Adapters.
On the housing, two 15V Lemo outputs provide power for your monitor and transmitter.
The included Feed Cable plugs into the 3-Pin output. This socket offers both regulated 15V and unregulated 20-25.5V 🔥 It automatically switches.
The Feed Cable sends that dual-voltage from the spine, down into the camera cage.
From there, connect a 3-Pin Lemo cable to power your camera! See our extensive, ever-growing list below ↓
This means no more load issues, cleaner builds and faster Quick Mode Changes!
The housing mounts flush inside the MōVI Pro spine and installation is simple.
Scroll for more info ↓
• INPUT Two 2-Pin Lemos
(forTB50 Battery Adapters)
• INPUT 8-Pin Lemo 20-28V
(for block battery or AC Power)
• OUTPUT 3-Pin Lemo 15/25V
(for Feed Cable)
• OUTPUT 2-Pin Lemo regulated 15V
(for accessories up to 100W)
• OUTPUT 2-Pin Lemo regulated 15V
(for accessories up to 100W)
The included Feed Cable extends the dual voltage from the MōVI Pro spine, down into the roll bar, and enters the tilt cage through the bearing assembly.
From there, plug in one of our 3-Pin Lemo cables to power your camera:
3-Pin Lemo to ALEXA Mini + Mini LF + 35
3-Pin Lemo to ALEXA Classic + 65 + Film Cameras
3-Pin Lemo to KOMODO-X + V-RAPTOR
3-Pin Lemo to RANGER + V-RAPTOR-XL
The Expansion Pack 8-Pin Lemo input allows you to source power from block batteries like the bebob CUBE 1200 and Anton Bauer Cine VCLX.
Ideal for extended run times during gear prep, when using a crane or dolly, and in between takes in the field.
It also enables hot-swap on MōVI Controller and NODO Inertia Wheels!
This cable is sold separately.
This five minute video takes you through the steps to install your Power Expansion Pack on MōVI Pro.
• Power Expansion Pack housing
• Mounting Clamp
• 28-inch Feed Cable
• Four M3 x 8mm socket head cap screws
WEIGHT
9.77oz / 277g
including housing + clamp + feed cable
HOUSING DIMENSIONS
2.91 x 3.22 x 1.18” / 74 x 82 x 30mm
FEED CABLE CONNECTOR SPECS
3-Pin (male) 0B Lemo Right Angle connector
3-Pin (female) 0B Lemo Straight connector
FEED CABLE LENGTH
28-inch / 70cm
We do our best to populate our store with as much technical info as possible!
If you have further questions or need advice for camera builds and projects, please get in touch with co-founder Tom Waugh.
Direct message via the Ignite Digi Instagram, or drop him an email: tom@ignitedigi.com.au
Just keep in mind he's living in Australian Eastern Standard Time (GMT/UTC+10).