Your Cart is Empty
🔥 FREE DHL EXPRESS SHIPPING ON ORDERS AUD $1200+ 🔥
IG.100165
$2,747.80 AUD
Power virtually any camera and accessory on the market - from a low voltage KOMODO, Ember and Teradek, to a power hungry VENICE, ALEXA 35 and Preston MDR!
TB50 Hammerhead is a premium rod mounted battery module that uses two DJI TB50 batteries to deliver reliable, hot-swappable power 🎥🔥
It features simultaneous 15V and 20-25V Lemo outputs, as well as USB-A and USB-C for your devices. For extended run times in the field and gear prep, feed in Block Battery or AC Power!
Hammerhead ships with a 15mm LWS Rod Mount. For those in studio mode, Studio Rod Mounts can be purchased separately!
Find out more below ↓
• Hot-swappable power
• Short circuit protection
• Two 2-Pin Lemo outputs
• Two 3-Pin Lemo outputs
• USB-C & USB-A outputs
• 8-Pin Lemo DC Input
• Easily swap rod mounts
• Achieve fast Quick Mode Changes!
• Resistant to extreme temperatures
• Made from high-grade 6061-T651 aluminium billet
Two 2-Pin Lemo Outputs
- regulated 15V up to 100W total
- feed power into Power Breakout
- power monitor, TX, EVF, FIZ
Two 3-Pin Lemo Outputs
- regulated 15V & unregulated 20-25V
- for powering cameras
USB-C
- up to 60W
- power laptops, cameras, audio devices
USB-A
- up to 18W
- power phones, tablets
The 8-Pin Lemo 20-28V DC Input allows you to source power from block batteries like the bebob CUBE 1200 and Anton Bauer Cine VCLX.
Ideal for extended run times during gear prep, when using a crane or dolly, and in between takes in the field.
It also enables hot-swap on MōVI Controller and NODO Inertia Wheels!
Cable sold separately.
We have secured a good supply of Quad Hubs and 180W AC Power Adapters to ensure current and new customers have access to this TB50 charging solution.
In stock now and ready to ship!
TB50 BATTERY
4280mAh / 97.58Wh
Below is an approximate run time until battery protection cut off.
2 - 2.5 HOURS
for ALEXA Mini LF + Teradek Bolt + SmallHD 703 UltraBright + 3x Tilta FIZ motors
BATTERY LEVEL
Use the TB50 LED indicator lights to judge battery level. We recommend changing the battery with one light illuminated (25%) or at the latest, one light flashing.
Hammerhead is hot-swappable! 🔥 Ensuring maximum power availability and eliminating downtime.
HOT TIP
When you need to change two exhausted batteries, give the system time to ensure power isn't lost.
Swap out the first TB50, wait 5 seconds, then swap the second.
This gives the battery a moment to wake up, check for errors and deliver power.
Hammerhead offers USB-C and USB-A to keep your devices healthy. Anytime, anywhere!
Particularly handy for file transfers and editing in the field, charging a GoPro, Tentacle Sync, phone or tablet.
For example, you could charge a 16" MacBook Pro twice with two TB50's!
TB50 Hammerhead ships with a LW15mm rod mount with 60mm spacing.
Slide onto carbon, steel or titanium rods with our Quick Release Bridge Plate.
The ratchet lever makes for easy position adjustments!
Underneath, the four M3 x 12mm socket head cap screws can be loosened to reposition the Hammerhead 90 degrees if required.
For those running 15mm or 19mm Studio Bridge Plates, we have a solution!
The cable we recommend for sending regulated 15V from the Hammerhead to our Power Breakout is:
2-Pin Lemo Right Angle to 2-Pin Lemo Straight
We believe the 14-inch variant is best to keep your build clean and efficient.
Use these cables to power your FIZ system, monitor, recorder and EVF.
MADE FROM
High-grade 6061-T651 aluminium billet
Hard anodised
WEIGHT
23.9oz / 678g solo
60.5oz / 1717g with two batteries
DIMENSIONS
3.6 x 3 x 6.6" / 92 x 77 x 169mm
For further technical questions and advice for your camera and gimbal builds, please get in touch with co-founder Tom Waugh.
Direct message via the Ignite Digi Instagram, or drop him an email: sales@ignitedigi.com.au
Just keep in mind he's living in Australian Eastern Standard Time.
